大家在查：枚举 Reggie sacral 讨人嫌 revolved ClickOnce 骨料特拉福德微渗漏 billboard

熔融

na.melt; fusion; melt-out; diatexis
网络melting; fusing; fuse

熔融

英-汉网络释义

熔融

na.

1.melt; melt-out; diatexis; six-zone-pass; fusion

1

Sometimes magma reaches the surface through volcanoes. Then the molten rock is called lava.

当岩浆通过火山口溢出地表时，便可称这种熔融的岩石为熔岩。

2

as I said previously the molten rock material is called magma if it is beneath the surface and called lava if it is on the surface .

比如我前面所说的那样，熔融岩石物质位于地表之下时称之为岩浆，位于地表时称其为熔岩。

3

In some cases it may be necessary to connect metal surfaces by means of a hard spelter solder which fuses at hight temperature .

某些情况下有必要用一种高熔融温度的强锌焊料来连接金属表面。

6

The mass flow rate of the molten metal is controlled by means of a choke element fitted in the casting trough .

熔融金属的质量流率借助配合在浇注槽内的一个扼流元件控制。

7

revolves around the ability of a thermoplastic material to be softened by heat and to Harden when cooled .

注射成型的基本概念是使热塑性材料在受热时熔融，冷却时硬化。

8

10

Since there is no coloring section and part of no reflection , so nothing natural , just as the glass melting and coloring .

由于没有着色的部分与着色部分没有反射差，所以完全没有不自然感，就如同将玻璃熔融着色一样。

11

The question now is whether the U. S. will re-evaluate its nuclear power plans in the wake of this latest meltdown.

现在的问题是，意识到最近的堆芯熔融后，美国政府是否愿意再次评估它们的核电站安全？

13

The fusibility of coal ash was different with that of slag .

煤灰与熔渣的熔融特性存在一定差异。

14

The molten aluminum alloy cools from the bottom of the investment casting shell upwardly to uniformly and quickly cool the aluminum alloy .

熔融铝合金从熔模铸造型壳的底部向上冷却，以便均匀地和快速地冷却铝合金。

16

The top seeded melt texture growth (TSMTG) process is one of the most effective methods for fabricating large YBCO bulk superconductors .

顶部籽晶熔融织构法（TSMTG ）是制备钇系高温超导块材的重要技术之一。

17

19

Squeeze casting is a process which involves the solidification of a molten metal in a closed die under disposed high pressure .

模压铸造是在密闭的金属模环境里对熔融金属施加强高压使其凝固的一种工艺。

20

25

The molten aluminum alloy is poured into an investment casing shell and lowered into a quenchant at a controlled rate .

将熔融铝合金注入熔模铸造型壳中，并且在受控的速率下放入淬火剂中。

30

热词推荐

大家在看