大家在查： IDGVC Massachusetts，Cambridge start_num 李小璐 NancyBush fatlute 艾德威娜•艾利斯 mortes Level-0-Backup fair words

退火后

网络annealing

退火后

退火后

退火后

annealing

[工学]材料科学专业学术翻译必备词汇 - 豆丁网 ... 阳极 anodic 659 退火后 annealing 660 发光性 properties 661 ...

3

Quality and reliability analysis. AFM as well as the XRD results both demonstrate the good crystallinity of the thin-film after annealing.

质量方面，AFM 表面形貌表征显示退火后的薄膜具有很好的结晶度，颗粒饱满、均匀。

4

and putting the rough blank after annealing to a second steel die for forging pressing and shaping to obtain the suspension clamp .

将退火后的粗胚放入第二钢模锻压定型为悬垂线夹。

5

9

The evolution of S-E curves for samples with lower thickness of middle metal is different with others after annealing in the air.

中间金属介质层比较薄的样品在退火后，其 S-E 曲线的变化规律与其他样品有着明显的不同。

10

The variation of the texture and magnetic properties of non-oriented silicon steel after being cold-rolled and annealed is studied .

对冷轧及退火后无取向硅钢织构及磁性能的变化进行研究。

11

Grain size is small after intermediate annealing . Small and homogeneous grains are obtained after decarburizing annealing .

中间退火后晶粒细小，脱碳退火后晶粒细小均匀。

13

Adding a small amount of rare-earth is favorable for forming cube -texture after recrystallization annealing .

少量稀土元素的加入有利于再结晶退火后立方织构的形成。

14

After the subsequent heat treatment , slightly changes of the orientation of macromolecule were found.

退火后，大分子链的取向发生较小的变化。

15

The results show that the hardness of H13 steel after annealing depends on size, relative amount and type of carbide .

明确了 H13 钢退火后硬度的高低与碳化物粒子的大小、相对量及碳化物的类型的依赖关系。

17

After annealing the grain sides of the Ti-O film increased and blood compatibility improved .

退火后氧化钛晶粒增大，血液相容性得到了一定的提高。

18

After annealing , the stress keeps along compressive and FWHM decrease .

退火后，半峰宽减小，薄膜应力转变为压应力。

19

In addition, this kind of material could be machined after annealing treatment .

且该材质具有退火后可切削加工的性能。

20

after annealing in N2, the rectification character of porous silicon increased.

多孔硅经氮气气氛下退火后，整流特性增强；

21

after anneal , scribing and packaging .

高温退火后，划片、封装。

22

And cracks appear in the film because tensile stress is too large when the sample is annealed at 400 centigrade.

在 400 ℃退火后，由于张应力太大，薄膜表面出现了裂纹。

23

Hardened steel is difficult to machine, but having been annealed , it can be easily machined .

淬火钢难于加工，但是经退火后就易于加工了。

24

25

27

processing the annealed bar into a tube blank , and extruding the tube blank ;

将退火后的棒材机加工成管坯，进行挤压；

28

Study of Annealing Treatment on Residual Stresses of Titanium Alloy during LSP

激光冲击钛合金表面退火后的残余应力分布

30

Structure and properties of CrMo steel annealed in series of temperatures after cool deformation

冷变形 CrMo 钢系列温度退火后的组织与性能

热词推荐

大家在看