大家在查： tiff 机械师 RefreshmyDataMartNow 耶鲁大学 Kanishka 贫民窟里 riled elitists 罗伯茨啧

型钢

na.section steel; shape steel
网络shaped steel; profile steel; swage

型钢

英-汉网络释义

型钢

na.

1.fashioned iron; figured iron; shape steel; profile steel; formed steel; structural steel; section steel; rolled-steel section

1

A grinder may be used to dress the surface defects but its working depth should be no more than 10% of nominal thickness .

冷弯型钢的表面缺陷允许用修磨方法清理，但清理深度不得超过公称厚度的 10%。

2

Self -drilling screws are the primary means of fastening cold-formed steel members in residential construction .

自攻自钻螺钉连接是冷弯薄壁型钢结构体系中一种主要的连接形式。

4

7

The node capacity and rotational stiffness increase with the length of T-stub increasing and reduces with the width of T-stub increasing.

节点的承载力和转动刚度随着 T 型钢的长度增加而增加，随着 T 型钢的宽度的增加而减小；

8

The bar steels adopt I steels, angle steels or channel steels, or adopt steel plates which are welded into a cross shaped section .

型钢选用工字钢、角钢或槽钢，或者采用钢板焊接为 “十 ”字型截面。

9

Fabricate panel faces from commercial rolled steel with a gauge thickness sufficient to give structural rigidity to the finished panel .

型钢预制板面的厚度应使成品板有足够的结构硬度。

10

at the bottom of weighing has closure plate , can play a tension role ; U-steel plates is not .

槽钢秤体底部有封板，起到张力作用；U 型钢秤体没有封板。

11

The invention relates to an adhesive-free steel-plastic composite winding pipe and a manufacturing method thereof.

本发明无胶型钢塑复合缠绕管及其制造方法。

12

The influence on SRC wide beam on its load-bearing capacity by the stirrup ratio and its shaped steel height is researched in this paper.

主要研究配箍率和型钢腹板高度对型钢混凝土扁梁抗剪承载能力的影响。

13

The analog simulation analysis of the temperature field was carried out for optimizing the cooling process parameters of H section roller .

为优化 H 型钢轧制工艺参数，对 H 型钢轧辊温度场进行模拟仿真分析。

14

H-beam is widely used in the construction of national economy in virtue of its excellent section properties .

H 型钢以其优良的断面特性而广泛应用于国民经济建设的各个领域。

15

as one of several strength - governing modes , distortional buckling is receiving more attentions.

作为控制冷弯薄壁型钢承载能力的几种屈曲模式之一，畸变屈曲正逐步受到重视。

16

When the C -type steel is docked with the Z-type steel , joint broken-bridge layers can be compounded between the joint surfaces .

C 型钢或 Z 型钢之间对接时，连接面之间可复合有连接断桥层。

17

By studying the T section steel truss joint , the defects in truss design are pointed out in this paper.

通过对 T 型钢桁架节点的研究，指出了目前设计中存在的问题。

18

In roadway support , bolt support saves cost of support over profile steel , economic performance is distinctly improved .

锚杆支护在煤巷支护方面，较型钢支护程度不同地节约了支护费用，经济效益明显提高。

19

A certain clearance is kept between the internally-embedded steel plate unit, the formed steel reinforcing rib unit and the boundary member .

所述在内嵌钢板，型钢加劲肋与边缘构件之间留一定间隙。

20

So steel reinforced concrete frame supported by frame -concrete structure appeared with a combination of them.

两者结合就形成了型钢混凝土框支框架 -混凝土核心筒结构。

22

U, I or H sections , not further worked than hot - rolled, hot-drawn or extruded, of a height of less than 80mm.

槽钢、工字钢及 H 型钢，除热轧、热拉拔或热挤压外未经进一步加工，截面高度低于 80 毫米。

23

Cold-formed thin-walled steel members are the main member of light steel structure .

冷弯薄壁型钢是轻钢结构的主要构件形式。

24

The scrap consists out of Ship Steel Scrap including and not limited to Ship plates, Ship beams , Ship Structural steel & also used rails .

废钢由造船废钢组成，包括但不限於造船钢板、船横梁、船结构型钢，还有废弃的路轨钢。

26

This paper presents an automatic stowing, packing and gathering system for a section steel tandem rolling line.

介绍一种用于精整工艺的自动化型钢码垛包装收集系统。

27

Rolling stock . Articulations with clevis and tenon and with gudgeon. Inner steel rings type as, ag.

铁路车辆 .带耳轴的轴颈和外壳的联接 .AS，AG 型钢制内环和外环

29

The results of the analysis by ANSYS indicated that the resistance factors in the cold-formed steel specification is slightly small .

根据 ANSYS 的分析结果可知冷弯薄壁型钢规范中规定的抗力分项系数偏小。

热词推荐

大家在看