大家在查： Gowing NDRC 脱毒 and ordinary 斯太 NationalEnergyAdministration 明确具体 colation genotoxic 活气

孔孔径

孔孔径

孔孔径

孔孔径

1

Crater radius is one of the important design parameters for the penetration in concrete target by shaped charge jet.

扩孔孔径大小是聚能装药侵彻混凝土目标的重要设计参数之一。

2

Among them, the inlet and outlet throttle hole diameters of the control volume are the key for the better injection performance.

其中，控制室进出口节流孔孔径的合理匹配和组合对获得良好的喷油特性尤为关键；

3

However , further increase in mesopore size led to a decrease in the reaction rate , which is due to low surface area of the MOF material.

然而，进一步的增加介孔孔径，多级孔道金属 -有机骨架的比表面积降低，导致反应速率的降低。

4

The method can control the density and aperture of the foams , thus the microcellular foams can be produced by the subsistent extruder .

此方法可以有效控制发泡材料泡孔密度和泡孔孔径范围，并可以应用现有挤出机，降低设备成本。

6

Patterns of pore size -pore volume distributions of activated carbons from different sources are summarized.

同时还对各类活性炭的微孔孔径 -孔容分布提出一些规律性的结论。

8

Stress whitening of foamable copolymer can increase the nucleation process during foaming and decrease the cellular diameter greatly .

可发泡共聚物的应力发白现象能改善其发泡成核效果并使泡孔孔径大大减小；

10

Whether it is tubular , flat -shaped or flat-complex , it can be made into different capillary sizes.

无论管形、平板形或平板复合形，均可制成不同的微孔孔径。

11

Pore size -pore volume distributions of different activated carbons made in China and abroad were estimated by adsorption isotherm methods.

叙述中国生产的部分商品化的各类活性炭及一些国外活性炭样品的微孔孔径 -孔容分布。

12

Study of Micropore Size Distribution and Its Effect on the Strength of Silica Fume Cement Paste

硅粉水泥石中微孔孔径分布及其对强度的影响

13

Comparison of Density Functional Theory and Molecular Simulation Methods for Pore Size Distribution of Mesoporous Materials

密度泛函与分子模拟计算介孔孔径分布比较

14

Test and Research on Optimum Configuration of Diameter of Screen Aperture and Incline of Screen Deck

筛孔孔径和筛面倾角优化配置的试验研究

15

Influence of bore diameter of baffle plate on shell pass properties of heat exchangers

折流板开孔孔径对换热器壳程性能的影响

16

Effect of diameter of spinneret hole on diameter and birefringence of PET filament

喷丝孔孔径对涤纶单丝直径与双折射的影响

17

Discussion of Wash Water Orifice Size Calculation

冲洗水节流孔孔径计算的探讨

18

The Application of Laser and Minus Lens to Measure Small-hole Diameter

激光与负透镜在小孔孔径测量中的应用

19

Design of throttle hole diameter of high-speed gas bearing

高速气浮静压轴承节流孔孔径的设计

热词推荐

大家在看